Thursday, February 26, 2015

Ties to Liberty quilt tutorial + A Blog Hop


Liberty Lawn quilt tutorial



Have you heard of the “Give Me Liberty” Club hosted by Westwood Acres? Members of this club receive 10 pieces (either F8, FQ or F16) of Liberty Lawn fabric each month for the year.  It’s a fun way to add to (or start!) your Liberty collection. 

Liberty Blog Hop
Maybe some of you are already members of the club or have a fun collection of Liberty prints and are just looking for some inspiration.  Well, Amanda has organized a Project Ideas Blog Hop!  Each day a different blogger will share their project using a bundle from the Give Me Liberty Club

Liberty Lawn fabrics

Amanda sent me this fat quarter bundle to work with and after toying with a few different ideas, I finally decided on this:

Quilt using Liberty of London fabrics




I’m calling this quilt “Ties to Liberty” since it uses the traditional Bow Tie quilt block and (of course) these pretty Liberty Lawn fabrics!  This quilt uses only 10 fat quarters and the finished quilt measures 56” x 70”. 

Today I'm going to share with you the tutorial to make this quilt - but if you would prefer a printable PDF version, there is one available here (for personal use only please).


 Fabric Requirements:

10 Fat Quarters of Liberty Lawn
1-5/6 yard background**
3-1/2 yards backing
1/2 yard binding
**For my background fabric I used “Soft Gray Mini Dot” from the Sorbets line by Quilting Treasures. 


Cutting:

From the background fabric cut 16 @ 4” x Width of fabric.  Then cut each strip into 10 @ 4” square.  You’ll need a 160 (4”) squares.

From each of the Liberty fat quarters, cut 16 (4” squares) and 16 (2”) squares.  (See the cutting diagram below.)

fat quarter cutting diagramLiberty Lawn fabrics

Step 1:  Fold each 2” square in half diagonally and finger press (or using a pencil draw a line diagonally through each).

Liberty quilt tutorial
Step 2:  Place a 2” square on one corner of a 4” background square. 

Liberty quilt tutorial

Step 3:  Sew directly on the folded/drawn line.
 Liberty quilt tutorial

Step 4:  Cut about 1/4” away from stitching. 
 Bowtie quilt block tutorial

Step 5:  Fold corner open and press.

Bowtie quilt block tutorial

Step 6:  Arrange block pieces as shown. 
 Bowtie quilt block tutorial

Step 7:  Sew top two and bottom two squares together using a 1/4” seam.  Press seams toward the large Liberty square.
 Bowtie quilt block tutorial

Step 8:  Sew top half to bottom half, matching center seam.  Press final seam open.  At this point I also gave the block a little spray of Best Press and pressed it for a few seconds to get it nice and flat. 

Bowtie quilt block tutorial

Make all of your bow tie blocks (you need 80 blocks).  Arrange blocks into quilt top.  The arrangement I used is below.  I love the secondary pattern this layout creates!

Liberty Bow Tie layout diagram

Sew blocks into rows.  Press the seams of all odd numbered rows to the left and even numbered rows to the right.  Then sew rows together.  Press your quilt top.  You’re now ready to baste, quilt and bind it!

Liberty quilt tutorial

For the quilting on mine, I did a new-to-me quilting design called Cabbage Roses.  It was a fast and very forgiving quilting design and it’s now one of my new favorites! 

cabbage roses quilting design

Thanks for stopping by!  You can see more of the Liberty Lawn prints here at Westwood Acres, and also by following along in the blog hop – each blogger will use a variety of prints and it will be fun to see what everyone creates with their bundle!

February 24th: Kick Off! A Crafty Fox
February 26th: Svetlana at Sotak Handmade 
February 26th: Andy at A Bright Corner 
February 27th: Chase at Quarter Inch Mark 
March 3rd: Lee at Freshly Pieced 


Liberty of London quilt tutorial


Wednesday, February 25, 2015

No Sew Sachet tutorial


Recently I had the chance to try out a new product from Therm O Web - it’s called Liquid Fabric Fuse and it’s super handy to have around.  One afternoon I needed a quick gift to give and I was able to make a few no-sew sachets using some fabric scraps and the Fabric Fuse. 

no sew sachet tutorial

You can find a quick tutorial for these no-sew sachets over on the Thermoweb blog today.  Here at our house, there’s a kiddo who is about to loose his first tooth.  I’m thinking he and I will use some Fabric Fuse and felt to make a little pocket tooth fairy pocket.  He’ll love it! 


Monday, February 23, 2015

Military Max

Update (May 2020): The tutorial for this quilt can now be found below!  

Military Max quilt tutorial

Hey friends!  Happy Monday!  I wanted to let you know I have a tutorial for this Military Max quilt over on the Riley Blake blog today. 

Military Max fabric

I had my boys with me at my local quilt shop when we first saw these prints and they both were quick to tell me how cool they thought these fabrics were.  It’s nice to see a military-themed line that’s skewed a bit younger than usual.  

The quilt is a fairly straightforward pattern, and uses my favorite Heat n Bond EZ Print sheets for the appliqued circle/stars.  These are pretty slick.  You can print right onto these sheets from your regular printer – no more tracing!

EZ Print sheets from Heat n Bond

If you’ve never tried a quilt with applique before, this quilt pattern might be a great way to try it out!  The applique pieces are large and with both curved and straight edges this would be great practice before moving on to more complex and/or smaller applique projects.

For the circle/stars on this quilt, I used Featherlite fusible web, and finished them with a simple straight stitch- nothing too complicated here. 

Military Max quilt tutorial

The finished quilt measures about 48” x 60” – a nice throw size. 

Military Max quilt tutorial

I used a minky fabric on the back so it’s great for snuggling (and later for using in our trailer when we camp this summer.)  When I use minky on the back, I like to keep the quilting less dense – this time I did some gentle meandering with a few stars sprinkled in. 

Military Max quilt tutorial

Just for fun, in EQ7 I made a version of this quilt using Summer Celebration – an upcoming line from Riley Blake.  Wouldn’t this make a fun 4th of July quilt?  It’s just asking to be used for picnics, isn’t it?

Military Max quilt tutorial using Summer Celebration fabrics
]
Ready for the tutorial?  Let's go!

The finished Military Max quilt measures about 48″ x 60″.
Supplies:
3/8 yard each of 6 prints
3/4 yard solid white
1/2 yard binding fabric
3-1/8 yards backing, or 2 yards of 60″ wide Minky
Circle and Star template
Heat n Bond EZ Print Featherlite sheets (need 5 sheets) OR Heat n Bond Lite or Featherlite (or other similar fusible web)
Cutting:
From one of the prints, cut 1 @ 6.5″ x WOF (width of fabric). Then subcut to 5 @ 6.5″ square.
From the other 5 prints, cut:
1 @ 6.5″ x WOF, then subcut to 3 @ 6.5″ x 12.5″
1 @ 6.5″ x WOF, then subcut to 5 @ 6.5″ x 6.5″
From the solid white cut:
2 @ 12.5″ x WOF, then subcut 5 @ 12.5″ square
You should now have 30 (6.5″) squares, and 15 (6.5″ x 12.5) rectangles.
Step 1: Using a 1/4″ seam, sew all 6.5″ squares into pairs. Press seam to one side.
Step 2: To each pair, sew one 6.5″ x 12.5″ rectangle. Press seams toward the rectangle. Make 15 of these blocks (12.5″ x 12.5″).
Step 3: Print the circle and star template onto 5 sheets of Heat n Bond EZ Print Featherlite OR print one template onto regular paper and trace onto regular fusible web (such as Heat n Bond Featherlite) using a pencil. You will need to trace the circle/star five times.
The EZ Print sheets are so handy because you can print directly onto them using your regular printer – no tracing needed!
Step 4: Cut out each circle, leaving about 1/4″ around the lines. Following the manufacturer’s instructions, press the Heat n Bond Featherlite to the wrong side of the solid green fabric. You will need 5 green circle/stars.
Using sharp scissors, cut out both the circle and the star, directly on the lines.
Step 5: Peel off paper backing. Center the circle/star shapes in each 12.5″ white square. Press in place.
Step 6: Using a coordinating thread, stitch around the edges of the circle/star applique with a straight stitch. Alternatively, a zigzag or blanket stitch could also be used.
Step 7: Lay out the quilt blocks following the diagram. Sew blocks into rows using a 1/4″ seam. Press seams for all odd numbered rows to the left and even numbered rows to the right. Sew rows together. Press seams.
Baste and quilt as desired. For the binding, use the 1/2 yard binding fabric, cut into 2.5″ strips to make a straight grain, double fold binding. 
I quilted mine in a gentle meander with a few stars sprinkled about. And as soon as it was bound, both of my boys claimed it as theirs!

If you make one, I'd love to see it!  Tag me on Instagram (@abrightcorner) and use the hashtags #abrightcorner and #militarymaxquilt so we can all see what you've created!

Wednesday, February 11, 2015

Storing Scraps

Ah, scraps.  Love them or hate them, they're inevitable.

You know how when you make a pattern that uses charm packs or jelly rolls you inevitably have a leftover charm or two or maybe just the ends of a a few of those jelly rolls?  Or you have several inches of binding leftover from a project?  Let me show you what I do with those.

Storing fabric scraps by size

These are the leftover bits from a project I just finished.  I set aside all of the scraps that were 2.5” wide.  When the project was done and I was cleaning up, I took a moment to cut them all down to be 2.5” square and then tossed them in this bin. 

(Any scrap that is 2.5” wide and more than 16” long gets set aside in a different spot – these are great to use in scrappy trip quilts!)

storing small fabric scraps by size

This is my 2.5” bin.  I keep most of my other scraps organized by color, but everything 2.5” square goes into this bin.  These are great for small sewing projects- like the needle book I made this past weekend. It was so handy to just pull out this one bin and dig through it to find what I needed for that patchwork backing!

Maybe someday I will make a quilt made from just these 2.5” squares.  Maybe a scrappy nine-patch.  Until then, I keep the bin stocked and I dip into it when I need little scraps.



Monday, February 9, 2015

A Little Needle Book

After tackling some larger projects lately, I just felt like doing a little bit of small sewing.  So this weekend I made myself a little needle book.  I used the tutorial written by Amy Sinibaldi (Nana Company) – it’s a great one!

needle book

For the front cover I did a simple single hexagon that’s been topstitched in place.  It’s just okay.  It works.  But the back of the needle book is what I’m in love with!

needle book

The back is made of 12 (1.5”) little squares.  They’re sewed together into a tiny patchwork piece.

needle book

I don’t do a lot of small sewing but when I do I’m completely smitten by it.  Small things are just adorable. 

Needle book

Inside the book I have four “pages” to hold needles and pins.  I’ll add the rest of my needles when I get around to it, but for now I have just my favorites in there.  

needle book

That one needle on the right?  That’s my favorite binding needle.  She’s helped me bind countless quilts.  She’s fast and just the right size.  She and I work really well together.  I should give her a nickname.  What’s that you say?  It’s weird to name needles?  Ok never mind then. 
  needle book

This was a fun little project for me.  It was nice to do something different than my usual quilt tops.  I think I'll be making a few more needle books in the near future.  These would make such a nice little gift!


Related Posts Plugin for WordPress, Blogger...